• Home
  • About Us
  • Contact Us
  • Privacy Policy
facebook twitter instagram pinterest bloglovin Email

Computer Technology



A diskless workstation or PC on a local-area network (LAN) is a computer system that does not have its own disk. Instead, it stores files on a network file server.

This type of system uses network booting to load the operating system, but it does contain its own main components including the CPU, RAM, video, sound and network adapter (see "workstation" for a description of common components).

Diskless workstations can reduce the overall cost of a LAN because one large-capacity disk drive is usually less expensive than several low-capacity drives. In addition, diskless workstations can simplify backups and security because all files are in one place -- on the file server. Also, accessing data from a large remote file server is often faster than accessing data from a small local storage device. One disadvantage of diskless workstations, however, is that they are useless if the network fails.

Advantages of Diskless Setup

  • Significantly reduce initial capital and implementation costs.
  • Reduce power and cooling requirements.
  • Accelerate deployments, upgrades, and server re purposing.
  • Reduce complexity and risk.
  • Improve critical system availability.
  • Implement enhanced Disaster Recovery solutions.

Disadvantages of Diskless Set up

  •  If the computer server fails, all the computer clients are useless. Clients cannot boot.
  • All computer clients will fail if the centralized LAN (ethernet) cable has been damaged.
  • For amateurs, initial investment might be expensive for creating the computer server.
  • Computer components required in the server might be unavailable in some rural areas. LAN cards
  • Diskless worstations might be good only if you have more than 10 computer clients. Computer server consumes a big amount of electricity. If you have less than 10 computer clients, electric consumption of that server might cost more than the total electric consumption of all the hard drives of the computer clients. Computer server is always turn on. So PISONET internet cafe with less than ten units might find it expensive to maintain a computer server.
  • If you want to add a significant number of computer clients in a diskless set-up, you need to upgrade or buy a new computer server with higher specs.
  • Diskless boot software has a price. Some requires you to pay in subscription basis depending on the number of computer clients. The more computer clients, the higher the price.
  • You need to learn some technicalities of using the diskless boot software and a lot of troubleshooting guides for software-and-hardware-related issues of a diskless set-up.
If your computer server is infected by a virus, all computer clients might be affected also.

In order for some games and softwares to run properly on the computer clients, you need to fix some software-related issues in the server. You need to consult your diskless software provider regarding this.
    Share
    Tweet
    Pin
    Share
    39 comments
    Section 1 – Prerequisites
    • Go to your vendor’s web site and download the appropriate x86 and x64 print drivers. For my needs, I downloaded the drivers for Windows 7 (32bit) and Windows 2012 (64 bit).
    • Next, extract the driver files to subfolders. In my case, the HP files I downloaded are self-extracting files. But be sure you uncheck the option to run the install immediately after extracting the files.
    • Finally, before proceeding, make sure you know the IP address of your network printer.
    Section 2 – Add the Network Printer
    • Go to Control Panel –> View Devices and Printers (under Hardware)
    • Click on Add a Printer. It will scan for new printers, and we should expect that it will not find any. 
    • Click on The printer that I want isn’t listed link.
    • On the next screen, click on the Add a local or network printer as an administrator link.
    • The scan will run again, and (again) we will click on The printer that I want isn’t listed link.
    • Select the Add a printer using a TCP/IP address or hostname option, then click Next.    
    • On the next screen, enter the printer’s IP address in the Hostname or IP address field, and click Next.
    • Wait while Windows looks for the printer. If the printer has a built in network adapter, you should see an appropriate Printer Class Driver selected.
    • However, in my case, the Laserjet 4100 is connected to the network via a D-Link print server adapter. Windows lists it as a generic network port and ask that I confirm that I had entered the correct IP address. Let’s click Next and it will rescan that IP address again.
    • This time it will ask me to identify the type of printer. I scroll through and locate the HP Laserjet 4100 Class Driver
    • Be sure to select Do not share this printer for now and click Next. We can share the printer later on.
    • Press Finish.
    Section 3 – Install the required Print Drivers
    • Open up the Devices and Printers window, select your printer, and then click on Print server properties
    • Click on the Drivers tab, and then click on Change Driver Settings. The window will refresh.
    • Install the x64 (64 bit) print driver
    • Select the Printer we are installing, and then click Add.
    • This will start the Add Printer Driver Wizard. Click Next.
    • Select the x64 box (leaving the x86 box unchecked) and click Next
    • Click Have Disk… and then click Browse… and locate the x64 print driver folder. For this HP printer, there was a list of .inf files available I followed Robert’s suggestion, and selected the first one in the list (immediately below the Drivers folder)
    • I then select the HP Universal Printing PCL 6 driver, click Next and then Finish.
    • But wait, we still have to install the 32 bit driver in a similar fashion! 
    • Install the x85 (32-bit) print driver 
    • So repeat steps 3-7, but check the x86 box and install the x86 driver.
    Section 4 – Change the Selected Print Drivers
    • Return back to the Devices and Printers window
    • Double click on your printer, and then double click on Customize your printer
    • Click on the Advanced tab, and change the print driver to the one we just installed.
    • If you wish, you can also click on the Sharing tab, and make the printer available.
    Share
    Tweet
    Pin
    Share
    10 comments
    The Windows Server 2012  Dashboard provides a simple and user-friendly interface for managing user accounts. To add a user account to Windows Server 2012 , perform the following steps:

    1. Open the Dashboard.
    2. Click Users on the navigation bar.
    3. Click Add a user account in the Tasks pane.
    4. Follow the prompts in the Add a User Account Wizard to create the user account.
    To remove a user account from Windows Server 2012 , perform the following steps:


    1. Open the Dashboard.
    2. Click Users on the navigation bar.
    3. Select the user account that you wish to remove.
    4. In the Tasks pane, click Remove the user account.
    5. Follow the prompts in the Delete a User Account Wizard to remove the user account. The wizard  provides the option to delete files associated with the user, including the user's redirected folder  and  File History backups, when the account is deleted. To retain these files on the server, make sure the corresponding box is unchecked.
    Share
    Tweet
    Pin
    Share
    5 comments
    Newer Posts
    Older Posts

    Labels

    • bio metrics
    • computers
    • Diskless
    • HDD
    • install
    • printer
    • recover
    • repair
    • restore games
    • SSD
    • technology
    • Thin client
    • tutorials
    • windows 10
    • windows server 2012

    Follow Us

    • facebook
    • twitter
    • instagram
    • Google+
    • pinterest
    • youtube

    Categories

    • bio metrics
    • computers
    • Diskless
    • HDD
    • install
    • printer
    • recover
    • repair
    • restore games
    • SSD
    • technology
    • Thin client
    • tutorials
    • windows 10
    • windows server 2012

    recent posts

    Sponsor

    Blog Archive

    • ▼  2018 (13)
      • ►  August 2018 (4)
      • ►  September 2018 (4)
      • ►  October 2018 (2)
      • ▼  November 2018 (3)
        • Managing user accounts in Windows Server 2012
        • Installing Network Printer to Windows Server 2012 ...
        • Diskless Workstations Advantage and Disadvantages

    Created with by ThemeXpose | Distributed by Blogger Templates